MemTest86 is the original, stand alone memory testing software for x86 computers. MemTest86 boots from a USB flash drive or CD and tests the RAM in your computer for faults using a series of comprehensive algorithms and test patterns.
Main Features
The latest version of MemTest86 supports all the current technologies, including
13 different RAM testing algorithms
DDR4 RAM (and DDR2 & DDR3) support
XMP - high performance memory profiles
UEFI - The new graphical standard for BIOS
64bit - From version 5, MemTest86 is native 64bit code
ECC RAM - support for error-correcting code RAM
Secure boot - With MemTest86 being code signed by Microsoft
Graphical interface, mouse support and logging of results to disk
Foreign language support (Chinese, German & more)
Self booting off USB or CD, without needing DOS, Linux nor Windows
Dual booting - Will boot to V4 in BIOS and V6 in UEFI from a single flash drive
Changelog:
Version 6.3.0 27/Jan/2016
New Features
New configuration file parameters MINSPDS, SPDMANUF and SPDPARTNO to specify the values that the RAM SPD must match before allowing the tests to start. This may be useful for RAM manufacturers that need to verify that the SPD data has been programmed correctly.
New configuration file parameter SKIPSPLASH to skip the 10 second splashscreen and proceed directly to the main menu
New mode for the configuration file parameter AUTOMODE to specify that MemTest86 shall run the tests immediately (skipping the splashscreen and main menu) but prompt the user to save the results after test completion
New configuration file parameters ADDR2SLBITS and ADDR2CSBITS to specify the bit positions of a memory address to exclusive-or (XOR) to determine which DIMM slot/chip select (0 or 1) corresponds to the failure address
Fixes/Enhancements
Added ECC detection support for Broadwell-H chipset
Added ECC detection support for Broadwell-DE chipset
Added ECC detection support for AMD Bald Eagle (2nd generation Embedded R-series)
Added ECC injection support for AMD Steppe Eagle/Bald Eagle
Added SMBus (SPD) support for Broadwell-DE
Fixed decoding of JEDEC manufacture names from the SPD
DDR3 XMP rev1.3 SPD decoding is now supported
Fixed retrieval of DDR4 SPD bytes for Intel ICH SMBUS
Added workaround for buggy firmware when calls to EFI MPServices fail
Fixed MemTest86 freezing on network boot
Fixed bug with wrong details being displayed for detected memory warnings in the report file
Fixed bug with CPU type detection for older CPUs
Fixed benchmark chart not being displayed after running a RAM benchmark test when there is a failure in saving results to disk
Report file now includes the RAM serial number, if available
Various system info related updates/fixes (CPU)
Notes:
IMPORTANT: MemTest86 V5 (and later) images supports dual booting (UEFI/BIOS). On machines that don't support UEFI, the older V4 BIOS release of MemTest86 will be automatically booted.
Installation and usage instructions are available on the Technical Information page
MemTest86 is a stand-alone program that does not require or use any operating system for execution. The version of Windows, Linux, or Mac being used is irrelevant for execution. However, you must use either Windows, Linux or Mac to create a bootable CD, Floppy or USB drive. The Windows and Linux/Mac packages are identical except for the compression and installation methods.
MemTest86 will not run on older PowerPC Mac systems. It was January 2006 when Apple started switching from PowerPC CPUs to Intel x86 CPUs. So machines earlier than 2006 definitely won't work.
System RequirementsUEFI or BIOS platform firmware
Windows, Linux, or Mac OS
CD or USB Flash Drive
Password= rez001
Download MemTest86 Pro (ISO+USB) v6.3.0(Full Version)[DDL-UC]
http://freetexthost.com/qyf0pb1yk3
Post a Comment
0 comments
Dear readers, after reading the Content please ask for advice and to provide constructive feedback Please Write Relevant Comment with Polite Language.Your comments inspired me to continue blogging. Your opinion much more valuable to me. Thank you.